There’s no doubt in my mind that you’ll be able to fix your Xbox 360 in less then 2 hours minutes and be back to playing your favorite game!
It will walk you through easy steps on how you can give the appropriate fix to your beloved console. Its clearly written, colored, and illustrated eBook will guide you through the different steps of putting an end to the most common Xbox 360 errors.
If this guide does not help you in any way, you can always take advantage of their 60 day money-back guarantee.
Here are a few things that really impressed me about the Xbox 360 Red Light Fix guide:
* It’s easy to understand. This is great if you’re not a technical person. I know I’m not, which is why I think this guide is great;
* They have great customer support. It’s better than most of the other red light fix repair sites. These guys will let you send pictures of your Xbox if you want or need professional recommendations on what to do; and
* The guide actually does what it say it will do…it’ll help you repair your xbox within a couple of hours.
If you want to get back to playing your game system within the next couple of hours, this guide is your best bet. It’ll help you repair the red lights within 2 hours guaranteed.
It is time that you get your copy of the Xbox 360 Red Light Fix. This James Dean Xbox 360 Guide will walk you through simple and effective fixes for the most common Xbox 360 errors.
James has comprehensively explained how to fix the three red lights. James promises to have you up and playing your Xbox 360 within one hour and he doesn’t disappoint.
If you want a repair guide that will fix the 3 red lights than this guide will do just that.
The XBox 360 is a great gaming console. There are plenty of excellent games available, it’s fast, reasonably stylish and well designed… except for one thing: The 360 has a serious design flaw with the heat sink on the main circuit board that can cause the console to overheat, especially if it is used when in confined spaces, or if other objects have been stacked on top. This in turn loosens up the solder holding the components on the circuit board, resulting in what is known as a dry joint. The dry joint prevents a connection between the electronic components, and causes a fault. The XBox 360 detects the fault and displays the dreaded three red lights on the front panel.
The main 3 Red Light Fix Repair Guide lays out the repair process as fourteen steps. These go through the disassembly, repair, and reassembly process. You would use this guide as the checklist for the repair process. The XClamp Repair Guide actually offers more detail than the main guide. It’s more of a manual than a checklist, and it offers diagrams, additional tips, and more explanatory text.
When I first started searching for a fix for rrod, I was overwhelmed by all of the information out there.
And then there are the multitudes of YouTube videos claiming to have found the miracle cure. Here are some that seem to be most popular – and ridiculous:
* The Towel Trick – It goes something like this: You take the hard drive off, wrap the entire unit in a towel to prevent the excess heat from escaping, turn the console on for about 15 minutes to cook (some instructions recommend 1 hour!), shut it down, unplug it for an hour, plug it back in and like magic it works. But why? I haven’t heard a decent explanation yet. Here is one of the explanations:
* The unit gets so hot that it melts the solder that was the cause the red lights in the first place.
Here are a couple of potential hazards as pointed out in the same instructions:
* Could potentially damage other parts of the Xbox; and
* The unit could catch on fire it gets so hot.
I have to say I am going to rate this as the 2nd most ridiculous fix of the three in consideration. Recommendation: Do not use this fix!
* The Ice Bath – I don’t even want to explain how to do this. Essentially, a Rubbermaid tub is filled with ice water, some vinegar is added, the Xbox 360 is unplugged and submerged in the water/vinegar mixture. After so many minutes the console is removed, drained of water and immediately plugged back in. Need I say more. I actually heard of a kid who attempted this and was severely shocked. This fix is the most ridiculous fix of the three in consideration. My recommendation: Ignore!
* X-Clamp Fix – This is the only legitimate fix I have found thus far. It is as permanent as it gets. Do not use it however if your Xbox 360 is still under warranty. Send the console back to Microsoft and let them honor the warranty. However, if the seal is broken and/or it isn’t under warranty this fix is your best bet. This is the fix in a nutshell; you open up the console, remove the x-clamps, clean up the old thermal paste, put new thermal paste on, replace the x-clamps with screws and washers, reassemble the unit, overheat, let it cool down and it works on approximately 90% of the units. Recommendation: Use this fix.
Basically, this red ring of death error has been a major problem with XBOX 360 devices.
Here’s some of the steps needed to fix the red ring of death error:
* Disassemble Xbox 360 Case – Using a fine tip screwdriver, poke the grayed out holes in the back of the case (poke the small rectangle holes). Get the Faceplate Off and move the latch up on the DVD drive up as you remove it. Unscrew the metal case which is under the plastic case. The video ‘How to Disassemble Xbox 360 Case’ which comes with James Dean’s Professional Xbox 360 repair guide is easy to follow and to the point. If you are not too comfortable with the ebook instruction, you can use this video to disassemble your Xbox 360 case;
* Remove the Motherboard – Unplug any cables connected to the motherboard and associated small devices;
* Take your take DVD drive out;
* Get the fan and motherboard out of the case. Do this gently
;
* Motherboard Disassembly – Turn the motherboard over and using a screwdriver, remove the X-clamp under heat sink. Do this step VERY gently (If you are not comfortable doing this, refer to the video which comes with James Dean’s 360 repair guide.);
* Applying Arctic Silver – Now you have to apply some arctic silver thermal compound gently over the GPU. You can get arctic silver thermal compound in any computer hardware shop for a couple of bucks. Set it aside for 15 to 20 minutes then place 2 nylon washers on each screw on the heat sink. Place the screws back in the motherboard and add two more nylon washers to screws. Place the heat sink on the tip of the screws and push them down gently. Finally, tighten the screws (not too tight!). Get everything back together, making sure everything is fitted properly. Now, turn your Xbox 360 back on and have some fun.
Check out James Dean’s Xbox 360 repair guide which will surely help you out. It comes with a money back guarantee so it’s tough to go wrong.
You can learn more about the Red Ring of Death and many of the other common Xbox 360 errors by visiting xbox 360 3 red lights fix review. There’s also a great deal on the xbox 360 red light fix. Last but not least, you can grab a $120 bonus for the 3 red light fix at fixurxbox.com.
